SN74HC393PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 60MHz |
| Base Part Number | 74HC393 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 360 ns |
| Turn On Delay Time | 360 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 36MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC393PWRG4 Overview
A device of this type is supplied in a package of type [0]. Using 14terminations, it can be configured. The supply voltage of 5V enables it operate in a fully flexible way. The device has 2terminations. In total, there are 14pins on the component. In this case, it is packaged as Tape & Reel (TR). In the circuit, there are 14pins that connect other parts. It is mounted in the manner of [0]. Initially, it appears to belong to the HC/UH family. Due to its membership in the 74HCseries, it is suitable for a variety of applications. It is decided to use the logic type [0]. -40°C~85°Cis the recommended operating temperature. In this case, it is mounted with a Surface Mounttype. It is able to operate with higher reliability when the supply voltage of 2V~6V is provided. The array has 4elements. It is possible for the result to be yesin Pbfree code. Among its base part number [0], you will find additional parts that are related. TR is employed for its packing. For the device to operate, a voltage supply of 5Vis required. A voltage of 2V is the minimum supply voltage (Vsup). In this case, the frequency is 60MHz Hz. The maximum supply voltage (Vsup) is up to 6V.
SN74HC393PWRG4 Features
Embedded in the 14-TSSOP (0.173, 4.40mm Width) package
4 bits per element
Operating supply voltage of 5V
Frequency of 60MHz
SN74HC393PWRG4 Applications
There are a lot of Texas Instruments SN74HC393PWRG4 Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- SQUARE ROOT
- Clocks
- Control counters
- counting/frequency sy nthesizers-BCD output
- Counter control/timers
- Communications Digital Frequency Synthesizers;
- Time-delay circuits
- VHF, UHF, FM, AM, etc.
- Time delay circuits
