SN74HC393PWT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC393 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 360 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 36MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC393PWT Overview
A device of this type is supplied in a package of type [0]. Using 14terminations, it can be configured. The supply voltage of 5V permits it to operate with full flexibility. The device has 2terminations. All component pins are equal to 14. Tape & Reel (TR)is used to package it. Circuit components are connected by 14pins. It is mounted using the way of [0]. The HC/UHfamily is derived from it. Having been designed as a member of the 74HCseries, it is well suited to a variety of applications. Binary Counteris selected as the logic type. It is recommended to set the operating temperature to -40°C~85°C. A mounting type of Surface Mountis adopted. In the case of a supply voltage of [0], it operates more reliably. There are 4 bits stored in each element of the array. Pbfree code may result in yes. There are more related parts under the 74HC393base part number. TR is employed for its packing. For the device to operate, a voltage supply of 5Vis required. As low as 2V Vsup is the minimum supply voltage. With a frequency of [0], it operates. Depending on the device type, the maximum supply voltage (Vsup) can be up to 6V volts.
SN74HC393PWT Features
Embedded in the 14-TSSOP (0.173, 4.40mm Width) package
4 bits per element
Operating supply voltage of 5V
Frequency of 60MHz
SN74HC393PWT Applications
There are a lot of Texas Instruments SN74HC393PWT Counters & Dividers applications.
- Up Counters
- Timing applications
- counting/frequency sy nthesizers-BCD output
- Counter control/timers
- ANALOG SIGNAL PROCESSING
- Fixed and programmable counters greater than 10
- ALGEBRAIC COMPUTATION
- Communications Digital Frequency Synthesizers;
- Fixed or Programmable Frequency Division
- MULTIPLICATION
