SN74HC4020DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 53MHz |
| Base Part Number | 74HC4020 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 190 ns |
| Turn On Delay Time | 190 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 14 |
| Prop. Delay@Nom-Sup | 32 ns |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 25 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 33MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC4020DR Overview
The device is packaged in the 16-SOIC (0.154, 3.90mm Width)type. For its configuration, 16terminations are used. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. A wire connects the 1elements. In all, there are 16 pins on each component. As a result, it is packaged in the way of a Tape & Reel (TR). In the circuit, there are 16pins that connect other components. To mount it, use the method of [0]. The HC/UHfamily is derived from it. Due to its membership in the 74HCseries, it is suitable for a variety of applications. It is assumed that the logic type is [0]. -40°C~85°Cshould be set as the operating temperature. Using a Surface Mountmounting type, it is mounted. It is able to operate with higher reliability when the supply voltage of 2V~6V is provided. There are 14bits stored in each element of the array. In terms of Pbfree code, the result may be yes. It should be noted that there are more related parts under the 74HC4020base part number. TR is employed for its packing. There is 2/6V voltage comes from the voltage source. For the device to operate, a voltage supply of 5Vis required. It is possible to supply the device with the minimum supply voltage (Vsup) of 2V. The frequency of the system is 53MHz. There is 6V maximum supply voltage (Vsup) allowed.
SN74HC4020DR Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
14 bits per element
Operating supply voltage of 5V
Frequency of 53MHz
SN74HC4020DR Applications
There are a lot of Texas Instruments SN74HC4020DR Counters & Dividers applications.
- SQUARING
- Binary counter/decoder
- Fixed and programmable counters greater than 10
- Control counters
- Clocks
- Time Out Timer for Consumer-Application Industrial Controls
- Divide-by"N" counters/frequency synthesizers
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Decade counter/decimal decode display (CD4017B）
