banner_page

SN74HC4040N

1 Element 5V CMOS DUAL Counters & Dividers 74HC Series 74HC4040 16 Pins Up Negative Edge 16-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC4040N
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 924
  • Description: 1 Element 5V CMOS DUAL Counters & Dividers 74HC Series 74HC4040 16 Pins Up Negative Edge 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Weight 951.693491mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74HC
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 53MHz
Base Part Number 74HC4040
Pin Count 16
Operating Supply Voltage 5V
Number of Elements 1
Supply Voltage-Max (Vsup) 6V
Power Supplies 2/6V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Propagation Delay 190 ns
Turn On Delay Time 190 ns
Reset Asynchronous
Family HC/UH
Logic Function Counter
Direction Up
Logic Type Binary Counter
Max I(ol) 0.0052 A
Number of Bits per Element 12
Prop. Delay@Nom-Sup 32 ns
Trigger Type Negative Edge
Power Supply Current-Max (ICC) 0.08mA
fmax-Min 25 MHz
Clock Edge Trigger Type Negative Edge
Count Rate 33MHz
Height 5.08mm
Length 19.3mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74HC4040N Overview


A 16-DIP (0.300, 7.62mm)package is used for this device. It is configured with 16terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. An interconnection of 1elements is provided by wires. 16is the number of pins on all components. It is packaged in the way of Tube. In the circuit, 16pins are used to connect other components. The Through Holeway is used to mount it. It emerges as a member of HC/UH family. With its 74HCseries designation, it can be used for a range of applications. It is decided to use the logic type [0]. The operating temperature should be set at -40°C~85°C. Mounting type Through Holeis used. Providing a voltage of 2V~6Vensures higher reliability of operation. An array consists of 12bits for each element. Among its base part number [0], you will find additional parts that are related. In this case, 2/6Vvoltage is generated by the voltage source. In order for it to operate, it requires a supply voltage of 5V . In the case of the supply voltage (Vsup), it can be as low as 2V. In this case, the frequency is 53MHz Hz. Up to a maximum voltage of 6Vcan be supplied (Vsup).

SN74HC4040N Features


Embedded in the 16-DIP (0.300, 7.62mm) package
12 bits per element
Operating supply voltage of 5V
Frequency of 53MHz

SN74HC4040N Applications


There are a lot of Texas Instruments SN74HC4040N Counters & Dividers applications.

  • Signal gating
  • POWER COMPUTATION
  • Dual Up Counters
  • MULTIPLICATION
  • VHF, UHF, FM, AM, etc.
  • Communications Digital Frequency Synthesizers;
  • Programmable decade counters
  • Timing applications
  • Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
  • SQUARING

Write a review

Note: HTML is not translated!
    Bad           Good