SN74HC4060DBRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 53MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC4060 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 615 ns |
| Turn On Delay Time | 615 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 25 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 33MHz |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC4060DBRG4 Overview
In the 16-SSOP (0.209, 5.30mm Width)package, it is supplied. There are 16terminations used for configuring it. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. 1 elements are interconnected in wires. The number of all component pins is 16. Tape & Reel (TR)is used to package it. In the circuit, 16pins are used to connect other components. The Surface Mountway is used to mount it. It is included in the HC/UHfamily. Due to its membership in the 74HCseries, it is suitable for a variety of applications. A logic type of Binary Counter is adopted. Setting the operating temperature to -40°C~85°C is recommended. In this case, it is mounted with a Surface Mounttype. In the presence of the supply voltage of [0], it can operate more reliably. Each element in the array stores 14 bits. Pbfree code may produce the result yes. The base part number of 74HC4060provides access to more related parts. It is packed with [0]. From the voltage source, there is 2/6Vvoltage. In order for it to operate, it requires a supply voltage of 5V . Supply voltages can be as low as 2V volts (Vsup). A frequency of 53MHzis used for operation. There is 6V maximum supply voltage (Vsup) allowed.
SN74HC4060DBRG4 Features
Embedded in the 16-SSOP (0.209, 5.30mm Width) package
14 bits per element
Operating supply voltage of 5V
Frequency of 53MHz
SN74HC4060DBRG4 Applications
There are a lot of Texas Instruments SN74HC4060DBRG4 Counters & Dividers applications.
- Programmable binary and decade
- Control counters
- Analog multiplexing and demultiplexing
- ANALOG SIGNAL PROCESSING
- SQUARE ROOT
- Digital multiplexing and demultiplexing
- Counter control/timers
- Timers
- Timing applications
- DIVISION
