SN74HC4060N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 53MHz |
| Base Part Number | 74HC4060 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 615 ns |
| Turn On Delay Time | 615 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 25 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 33MHz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC4060N Overview
A device of this type is supplied in a package of type [0]. In order to configure it, it uses 16terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. There are wires connecting 1elements. 16is the number of pins on all components. Tubeis used to package it. To connect the circuit's other components, there are 16pins. It is mounted in the manner of [0]. The HC/UHfamily is derived from it. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. Logic type Binary Counter is adopted. The operating temperature should be set at -40°C~85°C. It adopts a mounting type of Through Hole. By providing the supply voltage of [0], it is capable of operating more reliably. It contains 14elements. Further related parts can be found under its base part number 74HC4060. As a result of the voltage source, there is 2/6V voltage. For the device to operate, a voltage supply of 5Vis required. As low as 2V Vsup is the minimum supply voltage. The frequency of the system is 53MHz. It is possible to supply voltages up to 6V volts (Vsup).
SN74HC4060N Features
Embedded in the 16-DIP (0.300, 7.62mm) package
14 bits per element
Operating supply voltage of 5V
Frequency of 53MHz
SN74HC4060N Applications
There are a lot of Texas Instruments SN74HC4060N Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- TRUE RMS-TO-DC CONVERSION
- Programmable binary and decade
- Dual Up Counters
- Time Out Timer for Consumer-Application Industrial Controls
- Signal gating
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Control counters
- POWER COMPUTATION
- Timing applications
