SN74HC4060PW
| Parameters | |
|---|---|
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 53MHz |
| Base Part Number | 74HC4060 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 615 ns |
| Turn On Delay Time | 615 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 25 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 33MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
SN74HC4060PW Overview
This is a device supplied in the 16-TSSOP (0.173, 4.40mm Width) package. It is configured using 16terminations. The supply voltage of 5V permits it to operate with full flexibility. In wires, 1elements are connected. 16is the number of pins on all components. Packaging is based on Tube. Circuit components are connected with 16pins. The way of Surface Mount is used to mount it. Initially, it appears to belong to the HC/UH family. Due to its membership in the 74HCseries, it is suitable for a variety of applications. Binary Counteris used as the logic type. A temperature of -40°C~85°Cshould be set for the operating environment. This device is mounted in a Surface Mountmanner. In the presence of the supply voltage of [0], it can operate more reliably. An array consists of 14bits for each element. Based on the Pbfree code, the result may be yes. Under its base part number of [0], you will find additional related parts. From the voltage source, there is 2/6Vvoltage. In order for it to operate, it requires a supply voltage of 5V . A voltage of 2V is the minimum supply voltage (Vsup). The frequency of the device is 53MHz. Depending on the device type, the maximum supply voltage (Vsup) can be up to 6V volts.
SN74HC4060PW Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
14 bits per element
Operating supply voltage of 5V
Frequency of 53MHz
SN74HC4060PW Applications
There are a lot of Texas Instruments SN74HC4060PW Counters & Dividers applications.
- Frequency dividers
- Digital multiplexing and demultiplexing
- Fixed or Programmable Frequency Division
- Timing applications
- counting/frequency sy nthesizers-BCD output
- Time Out Timer for Consumer-Application Industrial Controls
- Frequency division
- Control counters
- DIVISION
- ANALOG SIGNAL PROCESSING
