SN74HC4060PWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 53MHz |
| Base Part Number | 74HC4060 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 615 ns |
| Turn On Delay Time | 615 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 25 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 33MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC4060PWG4 Overview
A 16-TSSOP (0.173, 4.40mm Width)package is used for this device. In order to configure it, it uses 16terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. An interconnection of 1elements is provided by wires. A total of 16pins are present on all components. Tubeis the packaging method used for this package. In the circuit, there are 16pins that connect other components. It is mounted using the way of [0]. In this case, it appears as a member of the HC/UH family. This device is a member of the 74HCseries and is well suited for a wide range of applications. It is assumed that the logic type is [0]. -40°C~85°Cshould be the operating temperature. This device is mounted in a Surface Mountmanner. By providing the supply voltage of [0], it is capable of operating more reliably. The array contains elements that store 14bits each. Based on Pbfree code, this may result in yes. You can find more related parts under its base part number of 74HC4060. Voltage from the voltage source is [0]. In order to operate, it requires a voltage of [0]. Supply voltage (Vsup) can be as low as 2V. It operates at a frequency of 53MHz Hz. The maximum supply voltage (Vsup) is up to 6V.
SN74HC4060PWG4 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
14 bits per element
Operating supply voltage of 5V
Frequency of 53MHz
SN74HC4060PWG4 Applications
There are a lot of Texas Instruments SN74HC4060PWG4 Counters & Dividers applications.
- Up Counters
- Programmable decade counters
- POWER COMPUTATION
- Programmable binary and decade
- Time-delay circuits
- Fixed and programmable counters greater than 10
- Clocks
- DIVISION
- Time Out Timer for Consumer-Application Industrial Controls
- Signal gating
