SN74HC4060PWRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 53MHz |
| Base Part Number | 74HC4060 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 615 ns |
| Turn On Delay Time | 615 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 25 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 33MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC4060PWRE4 Overview
This device is packaged in a 16-TSSOP (0.173, 4.40mm Width) package. 16 terminations are used for its configuration. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. A wire connects the 1elements. The total number of component pins is 16. As a result, it is packaged as Tape & Reel (TR). As part of the circuit, there are 16pins that connect other components. Surface Mountis the way in which it is mounted. It is included in the HC/UHfamily. This device is a member of the 74HCseries and is well suited for a wide range of applications. In this case, the logic type is set to [0]. Setting the operating temperature to -40°C~85°C is recommended. This device is mounted in a Surface Mountmanner. It is able to operate with higher reliability when the supply voltage of 2V~6V is provided. The array consists of elements storing 14bits each. The result may be yesin terms of Pbfree code. Further related parts may be found under the base part number 74HC4060. The packing of the product is carried out by [0]. In this case, 2/6Vvoltage is generated by the voltage source. For the device to operate, a voltage supply of 5Vis required. Supply voltage (Vsup) can be as low as 2V. With a frequency of [0], it operates. The maximum supply voltage (Vsup) is up to 6V.
SN74HC4060PWRE4 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
14 bits per element
Operating supply voltage of 5V
Frequency of 53MHz
SN74HC4060PWRE4 Applications
There are a lot of Texas Instruments SN74HC4060PWRE4 Counters & Dividers applications.
- SQUARE ROOT
- Divide-by"N" counters/frequency synthesizers
- Control counters
- Timing applications
- SQUARING
- POWER COMPUTATION
- Digital multiplexing and demultiplexing
- Decade counter/decimal decode display (CD4017B）
- Analog multiplexing and demultiplexing
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
