SN74HC4060PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 53MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC4060 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 615 ns |
| Turn On Delay Time | 615 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 25 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 33MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC4060PWRG4 Overview
A device of this type is supplied in a package of type [0]. This configuration uses 16terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. There are 1 terminations on the device. In all, there are 16 pins on each component. Packaging is based on Tape & Reel (TR). As part of the circuit, there are 16pins used to connect other components. To mount it, use the method of [0]. In this case, it appears as a member of the HC/UH family. Having been designed as a member of the 74HCseries, it is well suited to a variety of applications. Binary Counteris adopted as the logic type. In this case, the operating temperature should be set to -40°C~85°C. This device is mounted in a Surface Mountmanner. When the supply voltage is set to [0], it is able to operate with greater reliability. The array contains elements containing 14bits each. It is possible for the result to be yesin Pbfree code. Further related parts may be found under the base part number 74HC4060. For its packaging, TRis employed. The voltage source generates 2/6Vvoltage. For the device to operate, a voltage supply of 5Vis required. The minimum supply voltage (Vsup) is as low as 2V. There is 53MHz frequency associated with it. It is possible to reach a maximum supply voltage of 6VV (Vsup).
SN74HC4060PWRG4 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
14 bits per element
Operating supply voltage of 5V
Frequency of 53MHz
SN74HC4060PWRG4 Applications
There are a lot of Texas Instruments SN74HC4060PWRG4 Counters & Dividers applications.
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Programmable decade counters
- LINEARIZATION
- Frequency division
- Frequency dividing circuits
- Decade counter/decimal decode display (CD4017B）
- TRUE RMS-TO-DC CONVERSION
- Fixed and programmable counters greater than 10
- Clocks
- SQUARING
