SN74HC4066D

31ns, 34ns SPST - NO 30Ohm Typ DUAL Analog Switches MAKE-BEFORE-BREAK 74HC4066 14 Pins 100nA 4.5V 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74HC4066D
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 498
Description: 31ns, 34ns SPST - NO 30Ohm Typ DUAL Analog Switches MAKE-BEFORE-BREAK 74HC4066 14 Pins 100nA 4.5V 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Weight	129.387224mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	85Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	4.5V
Terminal Pitch	1.27mm
Base Part Number	74HC4066
Output	SEPARATE OUTPUT
Pin Count	14
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	4
Max Supply Voltage	6V
Min Supply Voltage	2V
Operating Supply Current	2μA
Nominal Supply Current	2μA
Max Supply Current	2μA
Throw Configuration	SPST
Propagation Delay	15 ns
Turn On Delay Time	38 ns
Supply Type	Single
Bandwidth	30MHz
Turn-Off Delay Time	43 ns
On-State Resistance (Max)	30Ohm Typ
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	42 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 9pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	31ns, 34ns
Crosstalk	-45dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	36ns
Voltage - Supply, Single (V+)	2V~6V
Drain to Source Resistance	150Ohm
Normal Position	NO
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74HC4066D Overview

The electronic component is convenient to ship overseas because it is packed in a 14-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 1:1. Increasing operating temperature to around -40°C~85°C TA. A total of 14 terminations have been recorded. A 4 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 4.5V voltage supply. A total of 14 pins are injected into the body of the electronic part. Circuits based on SPST - NO switching are used to construct these analog switch ics. Look for analog switch ic variants by searching with 74HC4066. As far as internal resistance is concerned, it has 85Ohm. You can find the functions of the 14 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 6V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. 2V is the lowest voltage the electrical component should receive. For this digital switch to work, 2μA current would suffice. An analogue multiplexer drains from a single voltage supply at 2V~6V. Put voltage above 2μA on the multiplexer to cause damage. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. Operating voltages range from 5V. There are 30MHz bandwidths for data transfer. It has a Drain to Source resistance of 150Ohm ohms.