SN74HC4066DR

31ns, 34ns SPST - NO 30Ohm Typ DUAL Analog Switches MAKE-BEFORE-BREAK 74HC4066 14 Pins 100nA 4.5V 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74HC4066DR
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 772
Description: 31ns, 34ns SPST - NO 30Ohm Typ DUAL Analog Switches MAKE-BEFORE-BREAK 74HC4066 14 Pins 100nA 4.5V 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Weight	129.387224mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	85Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	4.5V
Terminal Pitch	1.27mm
Base Part Number	74HC4066
Pin Count	14
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	4
Max Supply Voltage	6V
Min Supply Voltage	2V
Operating Supply Current	2μA
Max Supply Current	2μA
Throw Configuration	SPST
Propagation Delay	15 ns
Turn On Delay Time	38 ns
Supply Type	Single
Bandwidth	30MHz
Turn-Off Delay Time	43 ns
On-State Resistance (Max)	30Ohm Typ
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	42 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 9pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	31ns, 34ns
Crosstalk	-45dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	36ns
Voltage - Supply, Single (V+)	2V~6V
Normal Position	NO
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74HC4066DR Overview

Presented in 14-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Cut Tape (CT). Mounted in Surface Mount is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. There are 14 terminations totally. By its 4 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 4.5V voltage supply. There is an electrical component included in the 14 series. A SPST - NO switching circuit is used to build these analog multiplexers. Try searching with 74HC4066 to find analog multiplexer variants. There is 85Ohm internal resistance in this digital multiplexer. For details about the functions of 14 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. Analog switch ics with Single supply type are cost-effective. A low voltage of 2V should be applied to the electronic component. This multiplexer would work with 2μA current. An analogue multiplexer drains from a single voltage supply at 2V~6V. A digital multiplexer may suffer damage if voltage is applied above 2μA. It can operate from 5V operating voltages. The data can be transferred over a wide range of bandwidths, called 30MHz bandwidths.