Parameters |
Turn-Off Delay Time |
43 ns |
On-State Resistance (Max) |
30Ohm Typ |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
42 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
0.5pF 9pF |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
31ns, 34ns |
Crosstalk |
-45dB @ 1MHz |
Switching |
MAKE-BEFORE-BREAK |
Switch-on Time-Max |
36ns |
Voltage - Supply, Single (V+) |
2V~6V |
Drain to Source Resistance |
30Ohm |
Normal Position |
NO |
Height |
5.08mm |
Length |
19.3mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Number of Pins |
14 |
Weight |
927.99329mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Resistance |
30Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Number of Functions |
4 |
Supply Voltage |
4.5V |
Base Part Number |
74HC4066 |
Output |
SEPARATE OUTPUT |
Pin Count |
14 |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Number of Channels |
4 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
2μA |
Max Supply Current |
2μA |
Throw Configuration |
SPST |
Propagation Delay |
15 ns |
Turn On Delay Time |
38 ns |
Supply Type |
Single |
Bandwidth |
30MHz |
SN74HC4066N Overview
Due to its 14-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. Mounted in Through Hole is this multiplexer. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. Total terminations are 14. A high-quality output is provided by the electrical component's 4 channels. A 4.5V voltage supply should turn on and run the electronic component. The electronic part body is injected with 14 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. Search with 74HC4066 if you are looking for analog multiplexer variants. This digital multiplexer has 30Ohm internal resistance. The functions of 14 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 6V in normal situations. Analogue multiplexers of the Single supply type that are cost-effective. 2V is the lowest voltage the electrical component should receive. An operating current of 2μA would be sufficient for this switch device. The voltage required by this switch device is 2V~6V, draining from a single voltage supply. When the digital multiplexer is charged above 2μA, damage can occur. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. 5V operating voltages are supported by the electronic component. There are various bandwidths available for data transfer. The Drain to Source resistance of this electronic component is 30Ohm.
SN74HC4066N Features
4 Channels
Switch Circuit: SPST - NO
2μA Supply Current
Bandwidth: 30MHz
Drain-to-Source resistance: 30Ohm
SN74HC4066N Applications
There are a lot of Texas Instruments SN74HC4066N Analog Switches & Multiplexers ICs applications.
- Fault Tolerant Systems
- High-Voltage
- Communication systems
- SDH
- Automotive applications
- Digital Cross-Connects
- Residential Gateways, Home Gateway/Router
- Medical systems
- Channel Banks
- Audio/video switches