SN74HC4066PWR

31ns, 34ns SPST - NO 30Ohm Typ DUAL Analog Switches MAKE-BEFORE-BREAK 74HC4066 14 Pins 100nA 4.5V 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74HC4066PWR
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 711
Description: 31ns, 34ns SPST - NO 30Ohm Typ DUAL Analog Switches MAKE-BEFORE-BREAK 74HC4066 14 Pins 100nA 4.5V 14-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Weight	57.209338mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	150Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	4.5V
Base Part Number	74HC4066
Pin Count	14
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	4
Max Supply Voltage	6V
Min Supply Voltage	2V
Operating Supply Current	2μA
Max Supply Current	2μA
Throw Configuration	SPST
Propagation Delay	15 ns
Turn On Delay Time	38 ns
Supply Type	Single
Bandwidth	30MHz
Turn-Off Delay Time	43 ns
On-State Resistance (Max)	30Ohm Typ
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	42 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 9pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	31ns, 34ns
Crosstalk	-45dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	36ns
Voltage - Supply, Single (V+)	2V~6V
Drain to Source Resistance	150Ohm
Normal Position	NO
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74HC4066PWR Overview

As the electronic part is packed in 14-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Cut Tape (CT). This analog switch is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 14 terminations. Due to its 4 channels, the electrical component produces high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. It is part of the design of the 14 series that this electronic component is included. Unlike digital switches, these are based on SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with 74HC4066. As far as internal resistance is concerned, it has 150Ohm. To find out what the 14 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 6V. The analog switch ic is of the Single supply type and is cost-effective. A low voltage of 2V should be applied to the electronic component. This multiplexer would work with 2μA current. An analogue multiplexer drains from a single voltage supply at 2V~6V. When the digital multiplexer is charged above 2μA, damage can occur. 5V operating voltages are supported by the electronic component. The data can be transferred over a wide range of bandwidths, called 30MHz bandwidths. There is 150Ohm resistance between Drain and Source for this electronic part.