Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Weight |
57.209338mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
Termination |
SMD/SMT |
Resistance |
30Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
4.5V |
Base Part Number |
74HC4066 |
Output |
SEPARATE OUTPUT |
Pin Count |
14 |
Operating Supply Voltage |
5V |
Number of Channels |
4 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
2μA |
Max Supply Current |
2μA |
Throw Configuration |
SPST |
Propagation Delay |
15 ns |
Turn On Delay Time |
180 ns |
Supply Type |
Single |
Bandwidth |
30MHz |
Turn-Off Delay Time |
200 ns |
On-State Resistance (Max) |
30Ohm Typ |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
42 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
0.5pF 9pF |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
31ns, 34ns |
Crosstalk |
-45dB @ 1MHz |
Switching |
MAKE-BEFORE-BREAK |
Switch-on Time-Max |
36ns |
Voltage - Supply, Single (V+) |
2V~6V |
Normal Position |
NO |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74HC4066PWT Overview
The electrical component comes in 14-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Totally, there are 14 terminations. Due to its 4 channels, the electrical component produces high-quality output. With a 4.5V voltage supply, the electrical component should be turned on and run. An injection of 14 pins is performed into the body of the electrical component. SPST - NO switching circuits are used in these analog switch ics. Try searching with 74HC4066 to find analog multiplexer variants. Analog switches have 30Ohm internal resistance. Datasheets for 14 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. An effective Single supply digital multiplexer. 2V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 2μA would be sufficient for this switch device. Draining from a single voltage supply, this analog switch requires a voltage of 2V~6V. Put voltage above 2μA on the multiplexer to cause damage. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. There is a voltage range of 5V operating voltages for the electrical part. A 30MHz-bandwidth can be used for data transfer.
SN74HC4066PWT Features
4 Channels
Switch Circuit: SPST - NO
2μA Supply Current
Bandwidth: 30MHz
SN74HC4066PWT Applications
There are a lot of Texas Instruments SN74HC4066PWT Analog Switches & Multiplexers ICs applications.
- Central office
- E1 Network Equipment
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- High reliability control systems
- CSU
- Battery Powered Systems
- Audio and video switching
- Relay replacements
- Cable Modem
- Fiber In The Loop (FITL)