SN74HC42N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Decoder |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HC42 |
| Pin Count | 16 |
| Number of Outputs | 10 |
| Max Output Current | 5.2mA |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 4:10 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Bits | 10 |
| Propagation Delay | 38 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 4 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Max I(ol) | 0.0052 A |
| Power Supply Current-Max (ICC) | 0.08mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC42N Overview
Digital switch is provided in the 16-DIP (0.300, 7.62mm) for the purpose of saving board space.It is packaged in the way of Tube.Digital switch ic adheres to a mounting method of Through Hole.The multiplexers uses an analog IC Decoder as the analog part of the circuit.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Design engineers have more flexibility when digital controlled switch operates at 2V~6V voltage.As a member of 74HC series, the multiplexers can be used for a wide range of applications.There are 16 terminations included in its basic configuration.The base part number is 74HC42, which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 5V.A component pin count of 16 can be found on this turn signal switch.There is a supply type of Single employed as part of this supply.It is configured with 16 pins.Through Hole is the way it is mounted.The logic switch is a member of the HC/UH family.The multiplexer ic provides 10 bits.The minimal supply voltage (Vsup) should be kept at 2V to avoid some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 6V.A power supply is provided for mux switch's normal operation of 2/6V.The turn signal switch has 10 outputs designed for operation.Without any external influences, it consumes 8μA current of multiplexer ic at all times.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.This multiplexer provides 4 inputs.It is necessary for the digitalswitch to operate normally that 1 circuits be formed.
SN74HC42N Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 2/6V
Operating with the supply voltage of 5V
SN74HC42N Applications
There are a lot of Texas Instruments SN74HC42N Signal Switches / Multiplexers / Decoders applications.
- Microprocessor input/output systems
- PCIe
- Paper plants
- A/D converters
- Make full adder
- Data communication
- Encrypted communications system
- Speed control of medern motors
- GLAN
- CPU memory location identification
