SN74HC4851D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 195Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | 74HC4851 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Nominal Supply Current | 2μA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 95 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 6V |
| Number of Inputs | 8 |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 95 ns |
| On-State Resistance (Max) | 195Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 22pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 78ns, 78ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Drain to Source Resistance | 195Ohm |
| Normal Position | NC |
| Signal Current-Max | 0.05A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC4851D Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. The advanced packaging method Tube provides high reliability. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 16. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. Into the electrical component body are injected 16 pins. There are 1 circuits in this switch device. Try searching for the analog switch ic with 74HC4851 if you are looking for variants. An switch multiplexer with 195Ohm internal resistance has a value of 195Ohm. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 6V to a switch device. A analog switch ic that has a cost-effective Single supply type. There should be 2V voltage fed to the electrical part below 2V. The analogue multiplexer could operate on 2μA current. An analogue multiplexer drains from a single voltage supply at 2V~6V. Among the inputs that can be operated are the 8 inputs. There is 195Ohm resistance between the Drain and Source on this part.
SN74HC4851D Features
1 Channels
2μA Supply Current
Drain-to-Source resistance: 195Ohm
SN74HC4851D Applications
There are a lot of Texas Instruments SN74HC4851D Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- Cellular phones
- Digital access cross connects
- Avionics and Military Systems
- Access Concentrators
- DSLAMs
- Battery Powered Systems
- HDTV
- Intelligent PBX
- Optical Applications
