SN74HC4851DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 195Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Nominal Supply Current | 2μA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 95 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 95 ns |
| On-state Resistance Match-Nom | 2Ohm |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 90ns |
| Signal Current-Max | 0.05A |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC4851DG4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in SOIC. The total number of terminations is 16. A high-quality output is provided by the electrical component's 8 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. The electronic part body is injected with 16 pins. Internally, this switch multiplexer has a resistance of 195Ohm. Datasheets for functions of 16 pins are available. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 6V. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 2V. 2μA current would be enough for this multiplexer to operate. Operating 8 inputs is required. During operation, the multiplexer should not be exposed to a temperature above 125°C. This digital multiplexer has 1 outputs.
SN74HC4851DG4 Features
8 Channels
2μA Supply Current
SN74HC4851DG4 Applications
There are a lot of Texas Instruments SN74HC4851DG4 Analog Switches & Multiplexers ICs applications.
- Modems
- Multi-Line E1 Interface Cards
- Precision test equipment
- Microprocessor Controlled Analog Systems
- DSUs
- Audio and video switching
- Automatic test equipment
- Multiplexers
- CSU
- Digital cross connects (DSX-1)
