Parameters |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
195Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.4mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74HC4851 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
2μA |
Nominal Supply Current |
2μA |
Number of Bits |
8 |
Propagation Delay |
25 ns |
Turn On Delay Time |
95 ns |
Logic Function |
Demultiplexer, Multiplexer |
Input Voltage (Max) |
6V |
Supply Type |
Single |
Supply Current-Max (Isup) |
0.04mA |
Turn-Off Delay Time |
95 ns |
On-State Resistance (Max) |
195Ohm |
Multiplexer/Demultiplexer Circuit |
8:1 |
Current - Leakage (IS(off)) (Max) |
200nA |
Channel Capacitance (CS(off), CD(off)) |
22pF |
On-state Resistance Match-Nom |
2Ohm |
Switch Time (Ton, Toff) (Max) |
78ns, 78ns |
Channel-to-Channel Matching (ΔRon) |
3 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
90ns |
Switch-off Time-Max |
90ns |
Voltage - Supply, Single (V+) |
2V~6V |
Normal Position |
NC |
Signal Current-Max |
0.05A |
Height |
1.2mm |
Length |
3.6mm |
Width |
4.4mm |
Thickness |
1.05mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
41.900595mg |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
SN74HC4851DGVR Overview
Presented in 16-TFSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. Total terminations are 16. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. A total of 16 pins are injected into the body of the electronic part. 1 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with 74HC4851. As far as internal resistance is concerned, it has 195Ohm. Datasheets for functions of 16 pins are available. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 6V to a switch device. A cost-effective Single supply type analogue multiplexer. It is recommended to use 2V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 2μA. Using only a single voltage supply, this analog switch requires 2V~6V voltage. This analog switch ic utilizes SEPARATE OUTPUT output. It can conduct 8-bit signals.
SN74HC4851DGVR Features
1 Channels
2μA Supply Current
8-Bit
SN74HC4851DGVR Applications
There are a lot of Texas Instruments SN74HC4851DGVR Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- MP3 players
- Relay Replacement
- SONET/SDH ADM
- PDAs
- DSUs
- Fiber In The Loop (FITL)
- Battery Powered Systems
- Audio and video switching