SN74HC4851DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 195Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | 74HC4851 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Nominal Supply Current | 2μA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 95 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 6V |
| Number of Inputs | 8 |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 95 ns |
| On-State Resistance (Max) | 195Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 22pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 78ns, 78ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Normal Position | NC |
| Signal Current-Max | 0.05A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC4851DR Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). The advanced packaging method Cut Tape (CT) provides high reliability. Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 8:1. Extended operating temperature around -40°C~125°C TA. The total number of terminations is 16. This electronic part offers high-quality output due to its 1 channels. With a 3V voltage supply, the electrical component should be turned on and run. There are 16 pins injected into the electronic part body. This multiplexer is composed of 1 circuits. Using the 74HC4851 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 195Ohm. For functions related to 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. Digital switch that provides Single power at a cost-effective price. 2V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 2μA current. Draining from a single voltage supply, this analog switch requires a voltage of 2V~6V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. Operating the 8 inputs requires 8 inputs.
SN74HC4851DR Features
1 Channels
2μA Supply Current
SN74HC4851DR Applications
There are a lot of Texas Instruments SN74HC4851DR Analog Switches & Multiplexers ICs applications.
- Microprocessor Controlled Analog Systems
- E1 Multiplexer
- Battery Powered Instruments
- Switching Systems
- Digital cross connects (DSX-1)
- Public switching systems
- Medical Instrumentation
- Automatic test equipment
- Mechanical reed relay replacement
- Precision instrumentation
