SN74HC4851PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 650Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | 74HC4851 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Nominal Supply Current | 2μA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 95 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 6V |
| Number of Inputs | 8 |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 95 ns |
| On-State Resistance (Max) | 195Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 22pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 78ns, 78ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Drain to Source Resistance | 650Ohm |
| Normal Position | NC |
| Signal Current-Max | 0.05A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC4851PW Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operating temperature extended to -40°C~125°C TA. In total, there have been 16 terminations. By its 1 channels, the electronic component provides high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. 16 pins are injected to the electronic part body. Circuits number 1 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with 74HC4851. There is 650Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 6V to a switch device. A cost-effective Single supply type analogue multiplexer. A low voltage of 2V should be applied to the electronic component. This digital switch can be operated with a current of 2μA. Draining from a single voltage supply, this analog switch requires a voltage of 2V~6V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. There are 8 inputs to be operated. Drain to Source resistance for this electronic component is 650Ohm.
SN74HC4851PW Features
1 Channels
2μA Supply Current
Drain-to-Source resistance: 650Ohm
SN74HC4851PW Applications
There are a lot of Texas Instruments SN74HC4851PW Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- Avionics
- DSLAMs
- Audio and video switching
- Access Concentrators
- SONET/SDH ADM
- Communications systems
- HDTV
- Multi-Line E1 Interface Cards
- High reliability control systems
