SN74HC4851QDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.294023mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 195Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | 74HC4851 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Polarity | Non-Inverting |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Nominal Supply Current | 2μA |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 95 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 6V |
| Number of Inputs | 8 |
| Supply Type | Single |
| Turn-Off Delay Time | 95 ns |
| On-State Resistance (Max) | 195Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 22pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 78ns, 78ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~6V |
| Normal Position | NC |
| Signal Current-Max | 0.05A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC4851QDRQ1 Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 8 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. This electrical component is included in the 16 series of products. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with 74HC4851. In this multiplexer, the internal resistance is 195Ohm. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. Single supply type digital switch with a low cost. There should be 2V voltage fed to the electrical part below 2V. The switch device would be able to operate with 2μA current. Using only a single voltage supply, this analog switch requires 2V~6V voltage. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Operating 8 inputs is required. It belongs to the series Automotive, AEC-Q100.
SN74HC4851QDRQ1 Features
8 Channels
2μA Supply Current
SN74HC4851QDRQ1 Applications
There are a lot of Texas Instruments SN74HC4851QDRQ1 Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- Battery Powered Instruments
- Modems
- CSU
- Fault Tolerant Systems
- Cross Connects
- Precision test equipment
- Video switching
- Cable PC
- PBXs
