SN74HC4851QPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 195Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | 74HC4851 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 95 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 6V |
| Number of Inputs | 8 |
| Supply Type | Single |
| Turn-Off Delay Time | 95 ns |
| On-State Resistance (Max) | 195Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 22pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 78ns, 78ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~6V |
| Normal Position | NC |
| Signal Current-Max | 0.05A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC4851QPWRG4Q1 Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -40°C~125°C TA are extended for operation. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 8 channels. An 3V voltage supply should allow the electrical part to be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. A total of 1 circuits make up this switch device. Try searching with 74HC4851 if you're looking for variants. It has an internal resistance of 195Ohm. Please refer to the datasheets for 16 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 2V. The analogue multiplexer could operate on 2μA current. A voltage of 2V~6V is required for this switch device, which drains from a single voltage source. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. It is possible to operate 8 inputs. The Automotive, AEC-Q100 series contains it.
SN74HC4851QPWRG4Q1 Features
8 Channels
2μA Supply Current
SN74HC4851QPWRG4Q1 Applications
There are a lot of Texas Instruments SN74HC4851QPWRG4Q1 Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- DSUs
- Medical systems
- E1 Multiplexer
- Digital cross connects (DSX-1)
- Precision test equipment
- Routers
- Cross Connects
- HDTV
- Signal routing between systems
