SN74HC4852D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 650Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | 74HC4852 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Load Capacitance | 50pF |
| Nominal Supply Current | 2μA |
| Number of Bits | 4 |
| Propagation Delay | 33 ns |
| Turn On Delay Time | 47.5 ns |
| Family | HC/UH |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Turn-Off Delay Time | 100 ns |
| Output Polarity | TRUE |
| Logic IC Type | MULTIPLEXER AND DEMUX/DECODER |
| On-State Resistance (Max) | 195Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Power Supply Current-Max (ICC) | 0.01mA |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 22pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 39ns, 78ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Voltage - Supply, Single (V+) | 2V~6V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC4852D Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tube is used to provide high reliability. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 16. Turning on and running the electrical part should be easy with a 3V voltage supply. A total of 16 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SP4T switching circuits. There are 2 circuits in this multiplexer. 74HC4852 can be used to search for analog multiplexer variants. There is 650Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 16 pins functions. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Digital switch that provides Single power at a cost-effective price. It is recommended to use 2V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 2μA. Analogue multiplexers require a 2V~6V voltage to drain from a single voltage supply. Among the inputs that can be operated are the 8 inputs. This digital multiplexer has 4 outputs. It is capable of carrying out 4-bit operation.
SN74HC4852D Features
Switch Circuit: SP4T
2μA Supply Current
4-Bit
SN74HC4852D Applications
There are a lot of Texas Instruments SN74HC4852D Analog Switches & Multiplexers ICs applications.
- Cellular phones
- SONET
- Precision instrumentation
- Modems
- Battery Powered Systems
- Remote Powered Equipment
- Central office
- Communication systems
- High reliability control systems
- SDH/SONET multiplexers
