banner_page

SN74HC4852DGVR

39ns, 78ns SP4T 195Ohm DUAL Analog Switches 74HC4852 16 Pins 200nA 3V 16-TFSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC4852DGVR
  • Package: 16-TFSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 755
  • Description: 39ns, 78ns SP4T 195Ohm DUAL Analog Switches 74HC4852 16 Pins 200nA 3V 16-TFSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TFSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 41.900595mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 195Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74HC4852
Pin Count 16
Number of Outputs 4
Qualification Status Not Qualified
Number of Circuits 2
Max Supply Voltage 6V
Min Supply Voltage 2V
Operating Supply Current 2μA
Load Capacitance 50pF
Nominal Supply Current 2μA
Number of Bits 4
Throw Configuration 4PST
Propagation Delay 33 ns
Turn On Delay Time 47.5 ns
Family HC/UH
Logic Function Demultiplexer, Multiplexer
Number of Inputs 8
Output Characteristics 3-STATE
Supply Type Single
Turn-Off Delay Time 100 ns
Output Polarity TRUE
Logic IC Type MULTIPLEXER AND DEMUX/DECODER
On-State Resistance (Max) 195Ohm
Multiplexer/Demultiplexer Circuit 4:1
Power Supply Current-Max (ICC) 0.01mA
Current - Leakage (IS(off)) (Max) 200nA
Channel Capacitance (CS(off), CD(off)) 22pF
Switch Circuit SP4T
Switch Time (Ton, Toff) (Max) 39ns, 78ns
Channel-to-Channel Matching (ΔRon) 3 Ω
Voltage - Supply, Single (V+) 2V~6V
Height 1.2mm
Length 3.6mm
Width 4.4mm
Thickness 1.05mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74HC4852DGVR Overview


Shipping overseas is convenient with the electronic component packed in 16-TFSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 4:1. Operational temperature extended around -40°C~85°C TA. Totally, there are 16 terminations. A 3V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 16 series. The analog switch ics are built using SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. Using the 74HC4852 search parameter, you can discover variants of the switch. A 195Ohm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 2V should be applied to the electronic component. This multiplexer would work with 2μA current. Using only a single voltage supply, this analog switch requires 2V~6V voltage. It is possible to operate 8 inputs. A analog switch ics with 4 outputs is included. It conducts in a 4-bit manner.

SN74HC4852DGVR Features


Switch Circuit: SP4T
2μA Supply Current
4-Bit

SN74HC4852DGVR Applications


There are a lot of Texas Instruments SN74HC4852DGVR Analog Switches & Multiplexers ICs applications.

  • Industrial control systems
  • Precision test equipment
  • Industrial and process control systems
  • Battery-powered systems
  • Fiber In The Loop (FITL)
  • Relay replacements
  • Cable Telephony – NIU, Set-Top Box, Home Side Box
  • Microprocessor Controlled Analog Systems
  • 65 V DACs
  • Private Branch Exchange (PBX)

Write a review

Note: HTML is not translated!
    Bad           Good