Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
61.887009mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
195Ohm |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74HC4852 |
Pin Count |
16 |
Number of Outputs |
4 |
Qualification Status |
Not Qualified |
Number of Circuits |
2 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
2μA |
Load Capacitance |
50pF |
Nominal Supply Current |
2μA |
Number of Bits |
4 |
Throw Configuration |
4PST |
Propagation Delay |
33 ns |
Turn On Delay Time |
47.5 ns |
Family |
HC/UH |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
8 |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Turn-Off Delay Time |
100 ns |
Output Polarity |
TRUE |
Logic IC Type |
MULTIPLEXER AND DEMUX/DECODER |
On-State Resistance (Max) |
195Ohm |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
4:1 |
Power Supply Current-Max (ICC) |
0.01mA |
Current - Leakage (IS(off)) (Max) |
200nA |
Channel Capacitance (CS(off), CD(off)) |
22pF |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
39ns, 78ns |
Channel-to-Channel Matching (ΔRon) |
3 Ω |
Voltage - Supply, Single (V+) |
2V~6V |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74HC4852PWR Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. There are 16 terminations totally. When the electronic component is given a voltage of 3V, it should be turned on and run. It is injected into the electrical part body with 16 pins. Based on SP4T switching circuits, these analog multiplexers work. The multiplexer consists of 2 circuits. If you are looking for variants of the digital switch, trying search with 74HC4852. This digital multiplexer has 195Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. Multiplexers should not be powered above 6V in normal situations. Analogue multiplexers of the Single supply type that are cost-effective. 2V should be the lowest voltage fed to the electronic component. The switch device would be able to operate with 2μA current. An analogue multiplexer drains from a single voltage supply at 2V~6V. Operating the 8 inputs requires 8 inputs. In this digital multiplexer, there are 4 outputs. It is capable of carrying out 4-bit operation.
SN74HC4852PWR Features
Switch Circuit: SP4T
2μA Supply Current
4-Bit
SN74HC4852PWR Applications
There are a lot of Texas Instruments SN74HC4852PWR Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Data switching
- Avionics and Military Systems
- Signal routing between systems
- Multi-Line E1 Interface Cards
- Remote wireless modules
- Microprocessor Controlled Analog Systems
- Industrial
- Intelligent PBX
- Automotive applications