SN74HC4852PWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 195Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Nominal Supply Current | 2μA |
| Number of Bits | 4 |
| Propagation Delay | 38 ns |
| Turn On Delay Time | 47.5 ns |
| Family | HC/UH |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Turn-Off Delay Time | 100 ns |
| Output Polarity | TRUE |
| Logic IC Type | MULTIPLEXER AND DEMUX/DECODER |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC4852PWRG4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in TSSOP. The total number of terminations is 16. A 2 channel electronic part produces high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. In this multiplexer, the internal resistance is 195Ohm. To find out what the 16 pins do, please refer to the datasheets. Multiplexers should not be powered above 6V in normal situations. Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 2V. An operating current of 2μA would be sufficient for this switch device. Among the inputs that can be operated are the 8 inputs. In an environment with a temperature higher than 125°C, the digital switches should not operate. In this digital multiplexer, there are 4 outputs. It can conduct 4-bit signals.
SN74HC4852PWRG4 Features
2 Channels
2μA Supply Current
4-Bit
SN74HC4852PWRG4 Applications
There are a lot of Texas Instruments SN74HC4852PWRG4 Analog Switches & Multiplexers ICs applications.
- Battery Powered Instruments
- ISDN NT1/TA
- Battery Powered Systems
- USB 1.1 signal switching circuits
- New designs requiring multiplexer functions
- Data switching
- Digital access cross connects
- Fiber to the Home
- Audio/video switches
- HDTV
