SN74HC4852QPWRQ1

39ns, 78ns SP4T 195Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74HC4852 16 Pins 200nA 3V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74HC4852QPWRQ1
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 754
Description: 39ns, 78ns SP4T 195Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74HC4852 16 Pins 200nA 3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Number of Inputs	8
Supply Type	Single
Turn-Off Delay Time	100 ns
On-State Resistance (Max)	195Ohm
Multiplexer/Demultiplexer Circuit	4:1
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	22pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	39ns, 78ns
Channel-to-Channel Matching (ΔRon)	3 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	55ns
Switch-off Time-Max	110ns
Voltage - Supply, Single (V+)	2V~6V
Normal Position	NC
Signal Current-Max	0.05A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	195Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Base Part Number	74HC4852
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	3
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	2μA
Number of Bits	4
Propagation Delay	33 ns
Turn On Delay Time	47.5 ns
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V

SN74HC4852QPWRQ1 Overview

Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 3 channels. A 3V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the body of the electronic part. A SP4T switching circuit is used to build these analog multiplexers. The circuits in this analogue multiplexer number 2. 74HC4852 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 195Ohm. Datasheets for functions of 16 pins are available. This switch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 6V. Analogue multiplexer with a Single supply type that is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 2μA current would suffice. Using a single voltage supply, this switch device consumes 2V~6V volts. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. Among the inputs that can be operated are the 8 inputs. It is capable of carrying out 4-bit operation. It belongs to the series Automotive, AEC-Q100.