banner_page

SN74HC563DWR

D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74HC Series 74HC563 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC563DWR
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 812
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74HC Series 74HC563 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature BROADSIDE VERSION OF 533
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74HC563
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Inverting
Supply Voltage-Max (Vsup) 6V
Power Supplies 2/6V
Supply Voltage-Min (Vsup) 2V
Number of Ports 2
Output Current 7.8mA
Number of Bits 8
Propagation Delay 285 ns
Turn On Delay Time 23 ns
Family HC/UH
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 7.8mA 7.8mA
Logic Type D-Type Transparent Latch
Prop. Delay@Nom-Sup 44 ns
Control Type ENABLE LOW/HIGH
Number of Input Lines 8
Independent Circuits 1
Translation N/A
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74HC563DWR Overview


The 20-SOIC (0.295, 7.50mm Width) package contains it. Tape & Reel (TR) is the packaging method. The output it is configured with uses Tri-State. D-Type Transparent Latch is the logic type of this electrical device. According to Surface Mount, this electronic part is mounted. It operates at a voltage of 2V~6V. A temperature of -40°C~85°C is used for operation. The 74HC series contains FPGAs of this type. It is designed with 8 bits. In this device, there are 20 terminations that have been designed. The family 74HC563 includes it. With the supply voltage set at 5V, it is able to operate. 20 pins are provided. HC/UH is the family name of this electronic device. The 20 pins are designed into it. Mounting this electronic component follows the Surface Mount method. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches contains this part. 6V is the maximum supply voltage (Vsup). The device is powered by 2/6V power supplies. A voltage greater than 2V must be supplied as a power supply (Vsup). Electronic circuits comprise 8 input lines. As a result of its reliable performance, it is well suited for TR. The output current of 7.8mA makes it feature maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There are also characteristics of BROADSIDE VERSION OF 533 associated with it.

SN74HC563DWR Features


20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
74HC563 family
20 pin count
20 pins
2/6V power supplies

SN74HC563DWR Applications


There are a lot of Texas Instruments SN74HC563DWR Latches applications.

  • Control circuits
  • Automatic test equipment
  • Timers
  • Counter timers
  • Ring counter
  • Parallel data storage
  • Storage
  • Up/down difference counting
  • Multistage ripple counting
  • Network Switches

Write a review

Note: HTML is not translated!
    Bad           Good