SN74HC563DWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 533 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 23 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| High Level Output Current | -7.8mA |
| Low Level Output Current | 7.8mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC563DWRG4 Overview
In the package SOIC, it can be found. This package has the format of Tape and Reel. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. In order to operate it, the supply voltage must be 5V. 20 pins are available on it. This electronic device belongs to the family of HC/UH. Designed with 20 pins, it is compatible with a wide range of devices. Mounting this electronic component follows the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is a subcategory of FF/Latches for this part. If you want to achieve high efficiency, make sure the supply voltage is at 5V. To achieve its exceptional flexibility, it relies on 8 circuits. There are also characteristics of BROADSIDE VERSION OF 533 associated with it. 7.8mA is set as the low level output current. There is -7.8mA high level output current set. The operating temperature should be lower than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. Voltages up to 6V can be supplied. In order for the machine to operate, the supply voltage must be 2V. BUS DRIVER is the logic IC it uses. It features maximum flexibility in design due to 7.8mA output current.
SN74HC563DWRG4 Features
SOIC package
8 Bits
20 pin count
20 pins
SN74HC563DWRG4 Applications
There are a lot of Texas Instruments SN74HC563DWRG4 Latches applications.
- Communication systems
- Relay replacement
- Display
- Lamp and Display (LED)
- Pattern generators
- Phase comparator
- Digital bus buffer
- Programmable binary
- Automotive Body Electronics
- Parallel Input
