SN74HC573ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 285 ns |
| Turn On Delay Time | 23 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 44 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC573ADBR Overview
The package in which it is embedded is named 20-SSOP (0.209, 5.30mm Width). Tape & Reel (TR) is the way it is packaged. Tri-State is used for the output it is configured with. A D-Type Transparent Latch logic type is used in this electrical device. The way in which this electronic part is mounted is Surface Mount. In order for it to operate, it needs a supply voltage of 2V~6V. It is -40°C~85°C at the operating temperature. The 74HC series of FPGAs is the one this FPGA belongs to. An electronic part with 8 bits is designed. In this device, there are 20 terminations. As a member of the 74HC573 family, it falls under that category. In order to function, the supply voltage should be set to 5V. 20 pins are available on it. In terms of electronic devices, this one is in the HC/UH family. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is the method used for mounting this electronic part. In this device, there is a total of 2 ports available for use. This part can be found within the FF/Latches subcategory. It reaches 6V when the supply voltage (Vsup) reaches maximum. There are 2/6V power supplies required for this machine to operate. It is recommended to have a higher supply voltage (Vsup) than 2V. There are electronic circuits attached to the 8 input lines. Based on its reliable performance, this device is suitable for TR. It features maximum flexibility in design due to 7.8mA output current. High efficiency requires maintaining the supply voltage at 5V. There is also BROADSIDE VERSION OF 373 characteristics to it.
SN74HC573ADBR Features
20-SSOP (0.209, 5.30mm Width) package
74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
SN74HC573ADBR Applications
There are a lot of Texas Instruments SN74HC573ADBR Latches applications.
- Relay replacement
- Audio and video switching
- Shift register
- Counter
- Multistage ripple counting
- Meter applications
- Counters
- Shift right register
- A/D converters
- Serial Output Data Queuing
