Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Additional Feature |
BROADSIDE VERSION OF 373 |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74HC573 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
8 |
Operating Supply Current |
8μA |
Number of Ports |
2 |
Output Current |
7.8mA |
Number of Bits |
8 |
Propagation Delay |
285 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
23 ns |
Family |
HC/UH |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
7.8mA 7.8mA |
Logic Type |
D-Type Transparent Latch |
Prop. Delay@Nom-Sup |
44 ns |
Independent Circuits |
1 |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74HC573ADW Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. The package is in the form of Tube. In this configuration, the output is set to Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. There is no supply voltage for this device. There is a temperature of -40°C~85°C at which the system operates. An FPGA in this series belongs to the 74HC family. An electronic part with 8 bits is designed. This device has been designed with 20 terminations available. 74HC573 is its family. A 5V voltage supply is required for operation. 20 pins are provided. This electronic device is categorized as a HC/UH electronic device. This board has 20 pins on it, which is what it is designed for. Surface Mount is used to mount this electronic part. In this device, there is a total of 2 ports available for use. In the subcategory FF/Latches, this part belongs. 6V is the maximum supply voltage (Vsup). A total of 2/6V power supplies are required for it to operate. It is recommended to have a higher supply voltage (Vsup) than 2V. It features maximum flexibility in design due to 7.8mA output current. For maximum efficiency, the supply voltage should be set to 5V. The quiescent current consumed by it is 8μA because it is unaffected by external factors. To achieve its exceptional flexibility, it relies on 8 circuits. It is also characterized by BROADSIDE VERSION OF 373.
SN74HC573ADW Features
20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
SN74HC573ADW Applications
There are a lot of Texas Instruments SN74HC573ADW Latches applications.
- Lamp and Display (LED)
- Automotive Infotainment
- Serial Output Data Queuing
- General-Purpose Register
- Accumulator Registers
- Display
- Counting
- Programmable binary
- Stacked or Push-Down Registers
- Meter applications