Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74HC573 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
8 |
Number of Ports |
2 |
Output Current |
35mA |
Number of Bits |
8 |
Propagation Delay |
285 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
23 ns |
Family |
HC/UH |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
7.8mA 7.8mA |
Logic Type |
D-Type Transparent Latch |
Prop. Delay@Nom-Sup |
44 ns |
Number of Input Lines |
3 |
Independent Circuits |
1 |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74HC573ADWR Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. Tape & Reel (TR) is the way it is packaged. In its configuration, Tri-State is used as the output. There is D-Type Transparent Latch logic type for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. The supply voltage of the device is 2V~6V. A temperature of -40°C~85°C is used for operation. There are a number of FPGAs in this series, including this one. 8 Bits are used in the design of this electronic part. The device consists of 20 terminations that are designed to be used in conjunction with it. This type belongs to the 74HC573 family. The supply voltage of the device is 5V. 20 pins are available on it. HC/UH is the family name of this electronic device. The 20 pins are designed into it. Surface Mount is the way in which this electronic part is mounted. This device has a total of 2 ports. There is a subcategory of FF/Latches for this part. It is possible to reach 6V when the maximum supply voltage (Vsup) has been reached. There are 2/6V power supplies attached to it. There should be a voltage supply (Vsup) greater than 2V. Input Lines consist of electronic circuits, and there are 3. On the basis of its reliability, this device is well suited for TR. With 35mA, maximum design flexibility is ensured. A high efficiency supply voltage should be maintained at 5V. It consumes 8μA of quiescent current without being affected by outside factors. The superior flexibility of the system is achieved through its use of 8 circuits.
SN74HC573ADWR Features
20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
SN74HC573ADWR Applications
There are a lot of Texas Instruments SN74HC573ADWR Latches applications.
- Multistage ripple counting
- Frequency dividing
- Pattern Generators
- Network Switches
- Hammer Device Information
- Digital bus buffer
- Counter timers
- Frequency
- Automotive Body Electronics
- BCD counting