banner_page

SN74HC573APWR

D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74HC Series 74HC573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC573APWR
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 655
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74HC Series 74HC573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Packing Method TR
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number 74HC573
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Power Supplies 2/6V
Supply Voltage-Min (Vsup) 2V
Number of Circuits 8
Load Capacitance 50pF
Number of Ports 2
Output Current 7.8mA
Number of Bits 8
Propagation Delay 285 ns
Quiescent Current 8μA
Turn On Delay Time 23 ns
Family HC/UH
Logic Function D-Type, Latch
Current - Output High, Low 7.8mA 7.8mA
Logic Type D-Type Transparent Latch
Prop. Delay@Nom-Sup 44 ns
Number of Input Lines 3
Independent Circuits 1
Height 1.2mm
Length 6.5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Weight 76.997305mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Termination SMD/SMT
ECCN Code EAR99
Subcategory FF/Latches

SN74HC573APWR Overview


There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). A Cut Tape (CT) package is used to package it. Tri-State is the output configured for it. D-Type Transparent Latch is the logic type of this electrical device. Electronic components are mounted using the Surface Mount method. A 2V~6V supply voltage is required to operate it. There is a temperature of -40°C~85°C at which the system operates. It is a type of FPGA belonging to the 74HC series. With this electronic part, there are 8 bits. This device has been designed with 20 terminations available. 74HC573 is its family. With a supply voltage of 5V, it operates. 20 pins are included. This electronic device belongs to the family of HC/UH. There are 20 pins on it. Mounting this electronic component follows the Surface Mount method. This device is equipped with 2 ports. The part is in the FF/Latches subcategory. It is possible to reach 6V when the maximum supply voltage (Vsup) has been reached. The system is powered by 2/6V sources. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. There are electronic circuits attached to the 3 input lines. Considering the reliability of this device, it would be a good candidate for TR. Due to its 7.8mA output current, it offers maximum design flexibility. Optimal efficiency requires 5V as the supply voltage. Without external influences, it consumes 8μA quiescent current. In order to achieve its superior flexibility, 8 circuits are used.

SN74HC573APWR Features


20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies

SN74HC573APWR Applications


There are a lot of Texas Instruments SN74HC573APWR Latches applications.

  • Programmable binary
  • Stacked or Push-Down Registers
  • Serial Output Register
  • Multi-line decoders
  • Counters
  • Double bus register system
  • Automotive Infotainment
  • Frequency dividing
  • OC-48 communication systems
  • Automatic test equipment

Write a review

Note: HTML is not translated!
    Bad           Good