banner_page

SN74HC573APWRE4

D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC573APWRE4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 579
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case TSSOP
Number of Pins 20
Weight 76.997305mg
Packaging Tape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature BROADSIDE VERSION OF 373
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 20
Qualification Status Not Qualified
Operating Supply Voltage 5V
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Number of Circuits 8
Max Supply Voltage 6V
Min Supply Voltage 2V
Load Capacitance 50pF
Number of Ports 2
Current - Output 7.8mA
Number of Bits 8
Propagation Delay 34 ns
Turn On Delay Time 23 ns
Family HC/UH
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.006 A
Prop. Delay@Nom-Sup 44 ns
High Level Output Current -7.8mA
Low Level Output Current 7.8mA
Independent Circuits 1
Length 6.5mm
Width 4.4mm
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74HC573APWRE4 Overview


In the package TSSOP, it can be found. Packaged in the way of Tape and Reel. With this electronic part, there are 8 bits. This device has been designed with 20 terminations available. The device works with a voltage of 5V for its supply voltage. The 20 pind are equipped with it. It is part of the family of electronic devices called HC/UH. The pin configuration of the device is 20. Mounting this electronic component follows the Surface Mount method. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches contains this part. Its reliable performance makes it an excellent choice for TR. For maximum efficiency, the supply voltage should be set to 5V. 8 circuits are used to achieve superior flexibility. It also has characteristics of BROADSIDE VERSION OF 373. 7.8mA is set as the low level output current. It has been set to -7.8mA for the high level output current. Lower than 85°C is the ideal operating temperature. There should be a temperature above -40°C at which the device operates. It supports the maximal supply voltage of 6V. The minimal supply voltage is 2V. BUS DRIVER is the logic IC it uses. As the output current is 7.8mA, the design flexibility is maximum.

SN74HC573APWRE4 Features


TSSOP package
8 Bits
20 pin count
20 pins

SN74HC573APWRE4 Applications


There are a lot of Texas Instruments SN74HC573APWRE4 Latches applications.

  • Buffer Storage
  • Shift register
  • Serial Output Data Queuing
  • Frequency dividing
  • Synchronous frequency dividers
  • Bus system register with enable parallel lines at bus side
  • Counting
  • Buffer/Storage Registers
  • High-speed logic
  • Counter

Write a review

Note: HTML is not translated!
    Bad           Good