banner_page

SN74HC573APWRG4

D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC573APWRG4
  • Package: TSSOP
  • Datasheet: PDF
  • Stock: 519
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP(Kg)

Details

Tags

Parameters
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Package / Case TSSOP
Number of Pins 20
Weight 76.997305mg
Packaging Tape and Reel
JESD-609 Code e4
Pbfree Code yes
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature BROADSIDE VERSION OF 373
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Pin Count 20
Operating Supply Voltage 5V
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Number of Circuits 8
Max Supply Voltage 6V
Min Supply Voltage 2V
Load Capacitance 50pF
Number of Ports 2
Current - Output 7.8mA
Number of Bits 8
Propagation Delay 285 ns
Turn On Delay Time 23 ns
Family HC/UH
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Prop. Delay@Nom-Sup 44 ns
High Level Output Current -7.8mA
Low Level Output Current 7.8mA
Independent Circuits 1
Height 1.2mm
Length 6.5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74HC573APWRG4 Overview


In the TSSOP package, it can be found as an embedded module. Packaged in the way of Tape and Reel. The design of this electronic part is based on 8 bits. This device is designed with 20 terminations. In order to operate it, the supply voltage must be 5V. There are 20 pins on it. In the world of electronics, this electronic device belongs to the family of HC/UH. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is the method used for mounting this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part is in the FF/Latches subcategory. The device's reliable performance makes it a good choice for TR. High efficiency requires maintaining the supply voltage at 5V. The circuit's superior flexibility is achieved through the use of 8 circuits. It also has characteristics of BROADSIDE VERSION OF 373. It is set to zero for the low level output current. It has been set to -7.8mA for the high level output current. Ideally, the operating temperature should be lower than 85°C. Temperatures higher than -40°C should be used for operation. The maximum supply voltage is 6V. In order for the machine to operate, the supply voltage must be 2V. As for the logic IC it uses, it is a BUS DRIVER. It features maximum flexibility in design due to 7.8mA output current.

SN74HC573APWRG4 Features


TSSOP package
8 Bits
20 pin count
20 pins

SN74HC573APWRG4 Applications


There are a lot of Texas Instruments SN74HC573APWRG4 Latches applications.

  • Display driver
  • Four-bit storage with output enable
  • Clocks
  • Timers
  • Counting
  • Storage
  • Pattern Generators
  • Flip-flops
  • General-Purpose Register
  • Multistage ripple counting

Write a review

Note: HTML is not translated!
    Bad           Good