SN74HC573APWT
| Parameters | |
|---|---|
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | 74HC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 285 ns |
| Turn On Delay Time | 23 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 44 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 6.5mm |
SN74HC573APWT Overview
The package in which it is embedded is named 20-TSSOP (0.173, 4.40mm Width). A Tape & Reel (TR) package is used to package it. Tri-State is used for the output it is configured with. This electrical device has Logic type D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. A voltage of 2V~6V is used as the supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. An FPGA of this type belongs to the 74HC series. 8 Bits are used in the design of this electronic part. In this device, there are 20 terminations that have been designed. This type belongs to the 74HC573 family. It operates with a supply voltage of 5V. It has 20 pins that makes it easy to use. In terms of electronic devices, this one is in the HC/UH family. The 20 pins are designed into it. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports that can be connected to it. The part belongs to the FF/Latches subcategory. It reaches 6V when the supply voltage (Vsup) reaches maximum. There are 2/6V power supplies required for this machine to operate. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is appropriate for TR. As the output current is 7.8mA, the design flexibility is maximum. A high efficiency supply voltage should be maintained at 5V. There are also other characteristics of it, such as BROADSIDE VERSION OF 373.
SN74HC573APWT Features
20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
SN74HC573APWT Applications
There are a lot of Texas Instruments SN74HC573APWT Latches applications.
- Network Switches
- Shift left register
- Frequency
- Meter applications
- Communication systems
- Parallel data storage
- Automotive Infotainment
- Relay replacement
- Watches
- Serial Output Register
