Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100, 74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74HC573 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
7.8mA |
Number of Bits |
8 |
Propagation Delay |
34 ns |
Turn On Delay Time |
23 ns |
Family |
HC/UH |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
7.8mA 7.8mA |
Logic Type |
D-Type Transparent Latch |
Prop. Delay@Nom-Sup |
53 ns |
Control Type |
ENABLE LOW/HIGH |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Translation |
N/A |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74HC573AQDWRQ1 Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the way in which it is packaged. The output it is configured with uses Tri-State. This electrical device has the logic type D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. A 2V~6V voltage supply is required for operation. A temperature of -40°C~125°C is set as the operating temperature. In the Automotive, AEC-Q100, 74HC series, this FPGA is located. The design of this electronic part is based on 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. As a member of the 74HC573 family, it falls under that category. The device works with a voltage of 5V for its supply voltage. It has 20 pins that makes it easy to use. This electronic device is categorized as a HC/UH electronic device. This board has 20 pins on it, which is what it is designed for. A Surface Mount mounting method has been used for this electronic part. 2 ports are available on this device. Subcategory FF/Latches includes this part. 6V is the maximum voltage (Vsup) that can be supplied. A total of 2/6V power supplies are needed to run it. It is recommended that the supply voltage (Vsup) be greater than 2V. Input Lines consist of electronic circuits, and there are 8. Its reliable performance makes it an excellent choice for TR. With an output current of 7.8mA, it is highly flexible in terms of design. High efficiency requires a voltage supply of 5V.
SN74HC573AQDWRQ1 Features
20-SOIC (0.295, 7.50mm Width) package
Automotive, AEC-Q100, 74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
SN74HC573AQDWRQ1 Applications
There are a lot of Texas Instruments SN74HC573AQDWRQ1 Latches applications.
- Sample and hold register
- Network Switches
- Pattern generators
- Buffer/Storage Registers
- Multistage ripple counting
- Counters
- Four-bit storage with output enable
- Multi-line decoders
- Pseudo-random code generators
- Parallel Input