banner_page

SN74HC573AQPWRG4Q1

D-Type, Latch 2V~6V 8 Bits Tri-State Latches Automotive, AEC-Q100, 74HC Series 74HC573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HC573AQPWRG4Q1
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 906
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches Automotive, AEC-Q100, 74HC Series 74HC573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Height 1.2mm
Length 6.5mm
Width 4.4mm
Thickness 1mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Weight 76.997305mg
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series Automotive, AEC-Q100, 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74HC573
Pin Count 20
Qualification Status Not Qualified
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Power Supplies 2/6V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 8μA
Number of Bits 8
Propagation Delay 34 ns
Turn On Delay Time 23 ns
Family HC/UH
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 7.8mA 7.8mA
Logic Type D-Type Transparent Latch
Prop. Delay@Nom-Sup 53 ns
Control Type ENABLE LOW/HIGH
Number of Output Lines 8
Translation N/A

SN74HC573AQPWRG4Q1 Overview


In the package 20-TSSOP (0.173, 4.40mm Width), it can be found. A package of Tape & Reel (TR) has been used. It uses Tri-State as its output configuration. This electrical device has Logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A 2V~6V voltage supply is required for operation. There is a temperature of -40°C~125°C at which the system operates. This FPGA is part of the Automotive, AEC-Q100, 74HC series. There are 8 bits in this electronic part. This device has been designed with 20 terminations available. As a member of the 74HC573 family, it falls under that category. In order to function, the supply voltage should be set to 5V. The device is equipped with 20 pins. It is a member of the HC/UH family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. Electronic parts are mounted using the Surface Mount method. This device has 2 ports that can be connected to it. There is a subcategory of FF/Latches for this part. It reaches a maximum supply voltage (Vsup) of 6V. There are 2/6V power supplies required for this machine to operate. A supply voltage (Vsup) greater than 2V is required. The reliability of this device makes it well suited to TR. High efficiency requires a supply voltage of 5V. 8 output lines provide binary equivalents of input lines. A total of 1 elements make up this object.

SN74HC573AQPWRG4Q1 Features


20-TSSOP (0.173, 4.40mm Width) package
Automotive, AEC-Q100, 74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
1 elements

SN74HC573AQPWRG4Q1 Applications


There are a lot of Texas Instruments SN74HC573AQPWRG4Q1 Latches applications.

  • Storage
  • Programmable binary
  • Timers
  • Network Switches
  • Hammer
  • Display driver
  • Digital bus buffer
  • Four-bit storage with output enable
  • PCs and Notebooks
  • Sample and hold register

Write a review

Note: HTML is not translated!
    Bad           Good