SN74HC574APWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 84MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 33ns @ 6V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Propagation Delay (tpd) | 330 ns |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
SN74HC574APWR Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). D flip flop is embedded in the Tape & Reel (TR) package. There is a Tri-State, Non-Invertedoutput configured with it. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. The type of this D latch is D-Type. The FPGA belongs to the 74HC series. In order for it to function properly, its output frequency should not exceed 84MHz. A total of 1 elements are present. As a result, it consumes 8μA quiescent current and is not affected by external forces. Currently, there are 20 terminations. The 74HC574 family contains it. The power source is powered by 5V. Its input capacitance is 3pFfarads. In this case, the D flip flop belongs to the HC/UHfamily. This board has 20 pins. The maximal supply voltage (Vsup) reaches 6V. Normal operation requires a supply voltage (Vsup) above 2V. This flip flop has a total of 2ports.
SN74HC574APWR Features
Tape & Reel (TR) package
74HC series
20 pins
SN74HC574APWR Applications
There are a lot of Texas Instruments SN74HC574APWR Flip Flops applications.
- Clock pulse
- Automotive
- Convert a momentary switch to a toggle switch
- Count Modes
- Buffer registers
- Circuit Design
- Computers
- Functionally equivalent to the MC10/100EL29
- Balanced Propagation Delays
- Event Detectors
