SN74HC574DWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Clock Frequency | 40MHz |
| Propagation Delay | 265 ns |
| Turn On Delay Time | 24 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max Propagation Delay @ V, Max CL | 31ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 0.066 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC574DWG4 Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. A package named Tubeincludes it. There is a Tri-State, Non-Invertedoutput configured with it. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. The operating temperature is -40°C~85°C TA. This D latch has the type D-Type. It is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 40MHz Hz. The list contains 1 elements. There is 8μA quiescent consumption. 20terminations have occurred. If you search by 74HC574, you will find similar parts. The D flip flop is powered by a voltage of 5V . Input capacitance of this device is 3pF farads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. There is an electronic part mounted in the way of Surface Mount. This board is designed with 20pins on it. This device has Positive Edgeas its clock edge trigger type. This part is included in FF/Latches. It is designed with a number of bits of 8. The maximal supply voltage (Vsup) reaches 6V. A normal operating voltage (Vsup) should remain above 2V. Despite its superior flexibility, it relies on 8 circuits to achieve it. In order for the device to operate, it requires 2/6V power supplies. A D flip flop with 2embedded ports is available. High efficiency requires the supply voltage to be maintained at 5V. The output current of 7.8mA makes it feature maximum design flexibility. It is reported that there are 3 input lines.
SN74HC574DWG4 Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
SN74HC574DWG4 Applications
There are a lot of Texas Instruments SN74HC574DWG4 Flip Flops applications.
- Single Up Count-Control Line
- Cold spare funcion
- Storage Registers
- Communications
- Single Down Count-Control Line
- Data Synchronizers
- Computers
- Memory
- Clock pulse
- Registers
