SN74HC574NG4
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 40MHz |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 31ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| RoHS Status | ROHS3 Compliant |
SN74HC574NG4 Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. The Tubepackage contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Through Holemounts this electrical part. The JK flip flop operates at a voltage of 2V~6V. Temperature is set to -40°C~85°C TA. This logic flip flop is classified as type D-Type. The 74HCseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 40MHz. There are 1 elements in it. This process consumes 8μA quiescents. The 74HC574 family contains it. The input capacitance of this JK flip flopis 3pF farads.
SN74HC574NG4 Features
Tube package
74HC series
SN74HC574NG4 Applications
There are a lot of Texas Instruments SN74HC574NG4 Flip Flops applications.
- Latch
- Data transfer
- Computers
- Automotive
- ATE
- Load Control
- Shift Registers
- Synchronous counter
- Data storage
- Counters
