SN74HC590ADE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT; REGISTERED OUTPUTS |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC590 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 380 ns |
| Turn On Delay Time | 380 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 24MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC590ADE4 Overview
It is a device supplied in the 16-SOIC (0.154, 3.90mm Width) package. Using 16terminations, it can be configured. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. In this diagram, there are 1elements that are interconnected by wires. All component pins are equal to 16. It is packaged in the way of Tube. As part of the circuit, there are 16pins that connect other components. It is mounted in the way of [0]. The HC/UHfamily includes it. The 74HCseries is well suited to a number of uses. Binary Counteris used as the logic type. The operating temperature should be set at -40°C~85°C. There is a mounting type of Surface Mounton this device. When the supply voltage is set to [0], it is able to operate with greater reliability. The array consists of elements storing 8bits each. As far as Pbfree code is concerned, the result may be yes. It is important to note that RCO OUTPUT; REGISTERED OUTPUTSare really important features of this electronic device. Further related parts can be found under its base part number 74HC590. As a result of the voltage source, there is 2/6V voltage. The device operates on a supply voltage of [0]. There is a minimum supply voltage (Vsup) of 2V volts. Frequency 40MHzdetermines its operation. Up to a maximum voltage of 6Vcan be supplied (Vsup).
SN74HC590ADE4 Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
8 bits per element
RCO OUTPUT; REGISTERED OUTPUTS
Operating supply voltage of 5V
Frequency of 40MHz
SN74HC590ADE4 Applications
There are a lot of Texas Instruments SN74HC590ADE4 Counters & Dividers applications.
- Programmable binary and decade
- Signal gating
- counting/frequency sy nthesizers-BCD output
- Dual Up Counters
- Timing applications
- Divide-by-N counting
- Binary counter/decoder
- ALGEBRAIC COMPUTATION
- Communications Digital Frequency Synthesizers;
- Counter control/timers
