SN74HC590ADG4
| Parameters | |
|---|---|
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 380 ns |
| Turn On Delay Time | 380 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 24MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT; REGISTERED OUTPUTS |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | 74HC590 |
| Pin Count | 16 |
SN74HC590ADG4 Overview
A device of this type is supplied in a package of type [0]. There are 16terminations used for configuring it. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. There are wires connecting 1elements. A total of 16pins are available on all components. As a result, it is packaged in the way of a Tube. In the circuit, 16pins are used to connect other components. The way of Surface Mount is used to mount it. In this case, it appears as a member of the HC/UH family. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. The logic type of Binary Counter is adopted. A temperature of -40°C~85°Cshould be set for the operating environment. Having a mounting type of [0], it is suitable for installation. As a result, the device operates more reliably when a supply voltage of 2V~6Vis applied. The array contains elements containing 8bits each. Based on Pbfree code, this may result in yes. This electronic device is equipped with the following features [0]. The base part number of 74HC590provides access to more related parts. From the voltage source, there is 2/6Vvoltage. The device requires a supply voltage of [0]. The minimum supply voltage (Vsup) is as low as 2V. In this case, the frequency is 40MHz Hz. The maximum supply voltage (Vsup) is up to 6V.
SN74HC590ADG4 Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
8 bits per element
RCO OUTPUT; REGISTERED OUTPUTS
Operating supply voltage of 5V
Frequency of 40MHz
SN74HC590ADG4 Applications
There are a lot of Texas Instruments SN74HC590ADG4 Counters & Dividers applications.
- MULTIPLICATION
- POWER COMPUTATION
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Divide-by"N" counters/frequency synthesizers
- TRUE RMS-TO-DC CONVERSION
- Programmable binary and decade
- Timing applications
- Fixed or Programmable Frequency Division
- DIVISION
- Dual Up Counters
