SN74HC590ADR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT; REGISTERED OUTPUTS |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | 74HC590 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Nominal Supply Current | 80μA |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 380 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Number of Inputs | 1 |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Ambient Temperature Range High | 85°C |
| Count Rate | 24MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC590ADR Overview
16-SOIC (0.154, 3.90mm Width)is a package in which this device is packaged. The configuration of this device is based on 16terminations. This device is fully flexible due to the supply voltage of [0]. There are a total of 16 pins in all components. As a result, it is packaged in the way of a Tape & Reel (TR). In the circuit, 16pins are used to connect other components. The device is mounted in the direction of [0]. The HC/UHfamily is derived from it. Due to its membership in the 74HCseries, it is suitable for a variety of applications. It is adopted that the logic type is [0]. -40°C~85°Cshould be set as the operating temperature. Using a Surface Mountmounting type, it is mounted. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. The array contains elements that store 8bits each. Pbfree code may result in yes. It is important to note that RCO OUTPUT; REGISTERED OUTPUTSare really important features of this electronic device. It should be noted that there are more related parts under the 74HC590base part number. In order to package it, TRis employed. From the voltage source, there is a voltage of 2/6V volts. The device operates on a supply voltage of [0]. It is possible to supply the device with the minimum supply voltage (Vsup) of 2V. The frequency of the device is 40MHz. Up to 6Vis the maximum supply voltage (Vsup). As a result, the system receives 1outputs.
SN74HC590ADR Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
8 bits per element
RCO OUTPUT; REGISTERED OUTPUTS
Operating supply voltage of 5V
Frequency of 40MHz
SN74HC590ADR Applications
There are a lot of Texas Instruments SN74HC590ADR Counters & Dividers applications.
- LINEARIZATION
- Counter control/timers
- Time-delay circuits
- Frequency division
- Communications Digital Frequency Synthesizers;
- SQUARING
- Dual Up Counters
- Analog multiplexing and demultiplexing
- Time Out Timer for Consumer-Application Industrial Controls
- TRUE RMS-TO-DC CONVERSION
