SN74HC590ADT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT; REGISTERED OUTPUTS |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC590 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 380 ns |
| Turn On Delay Time | 380 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 24MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC590ADT Overview
16-SOIC (0.154, 3.90mm Width)is a package in which this device is packaged. For its configuration, 16terminations are used. 5Vis enabled to operate in an extremely flexible manner due to its supply voltage. 1 elements are interconnected in wires. All component pins are equal to 16. As a result, it is packaged in the way of a Tape & Reel (TR). To connect the circuit's other components, there are 16pins. Surface Mountis the way in which it is mounted. It emerges as a member of HC/UH family. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. Binary Counteris used as the logic type. Setting the operating temperature to -40°C~85°C is recommended. Having a mounting type of [0], it is suitable for installation. As a result, the device operates more reliably when a supply voltage of 2V~6Vis applied. It contains 8elements. Pbfree code may result in yes. Among the features of this electronic device, RCO OUTPUT; REGISTERED OUTPUTSare essential. Further related parts may be found under the base part number 74HC590. The packing of the product is carried out by [0]. In this case, 2/6Vvoltage is generated by the voltage source. The device operates on a supply voltage of [0]. The minimum supply voltage (Vsup) is 2V. It operates at a frequency of 40MHz Hz. A maximum supply voltage (Vsup) is available up to 6V.
SN74HC590ADT Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
8 bits per element
RCO OUTPUT; REGISTERED OUTPUTS
Operating supply voltage of 5V
Frequency of 40MHz
SN74HC590ADT Applications
There are a lot of Texas Instruments SN74HC590ADT Counters & Dividers applications.
- Time delay circuits
- Decade counter/decimal decode display (CD4017B）
- Fixed or Programmable Frequency Division
- Signal gating
- Timers
- LINEARIZATION
- Counter control/timers
- Up Counters
- Dual Up Counters
- Time-delay circuits
