SN74HC590ADWR
| Parameters | |
|---|---|
| Count Rate | 24MHz |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT; REGISTERED OUTPUTS |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | 74HC590 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 380 ns |
| Turn On Delay Time | 380 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
SN74HC590ADWR Overview
A 16-SOIC (0.295, 7.50mm Width)package is used for this device. The configuration of this device is based on 16terminations. 5Vis fully flexible due to its voltage supply. The device has 1terminations. All component pins are equal to 16. There is a package in the form of Cut Tape (CT). A circuit is connected to other components by 16pins. It is mounted in the way of [0]. The HC/UHfamily is derived from it. Due to its membership in the 74HCseries, it is suitable for a variety of applications. In this case, the logic type is set to [0]. -40°C~85°Cis the recommended operating temperature. This device is mounted in a Surface Mountmanner. In the presence of the supply voltage of [0], it can operate more reliably. The array consists of elements storing 8bits each. Using the Pbfree code, the result may be yes. When it comes to this electronic device, RCO OUTPUT; REGISTERED OUTPUTS are much important features. More related parts are available under its base part number 74HC590. In order to package it, TRis employed. From the voltage source, there is 2/6Vvoltage. In order to operate, it requires a voltage of [0]. There is 2V minimum supply voltage (Vsup) for this device. There is 40MHz frequency associated with it. Typically, the supply voltage (Vsup) is limited to 6V.
SN74HC590ADWR Features
Embedded in the 16-SOIC (0.295, 7.50mm Width) package
8 bits per element
RCO OUTPUT; REGISTERED OUTPUTS
Operating supply voltage of 5V
Frequency of 40MHz
SN74HC590ADWR Applications
There are a lot of Texas Instruments SN74HC590ADWR Counters & Dividers applications.
- Programmable decade counters
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Binary counter/decoder
- counting/frequency sy nthesizers-BCD output
- Timing applications
- Time delay circuits
- POWER COMPUTATION
- Signal gating
- Digital multiplexing and demultiplexing
- Timers
