SN74HC590AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT; REGISTERED OUTPUTS |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 40MHz |
| Base Part Number | 74HC590 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 380 ns |
| Turn On Delay Time | 380 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 24MHz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC590AN Overview
This is a device supplied in the 16-DIP (0.300, 7.62mm) package. There are 16terminations used for configuring it. Having a supply voltage of 5V enables to operate in a fully flexible manner. The device has 1terminations. All component pins are equal to 16. Tubeis used to package it. In the circuit, 16pins are used to connect other components. Through Holeis the way in which it is mounted. In this case, it appears as a member of the HC/UH family. Having been designed as a member of the 74HCseries, it is well suited to a variety of applications. A logic type of Binary Counter is adopted. The operating temperature should be set at -40°C~85°C. This device is mounted in a Through Holemanner. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. The array stores 8bits in each element. It is important to note that in regards to this electronic device, RCO OUTPUT; REGISTERED OUTPUTSis an extremely significant feature. More related parts are available under its base part number 74HC590. The voltage source produces a voltage of 2/6V volts. To operate, it requires a supply voltage of [0]. Supply voltages can be as low as 2V volts (Vsup). It operates with the frequency of 40MHz. Up to a maximum voltage of 6Vcan be supplied (Vsup).
SN74HC590AN Features
Embedded in the 16-DIP (0.300, 7.62mm) package
8 bits per element
RCO OUTPUT; REGISTERED OUTPUTS
Operating supply voltage of 5V
Frequency of 40MHz
SN74HC590AN Applications
There are a lot of Texas Instruments SN74HC590AN Counters & Dividers applications.
- Fixed and programmable counters greater than 10
- ANALOG SIGNAL PROCESSING
- Divide-by"N" counters/frequency synthesizers
- Digital multiplexing and demultiplexing
- SQUARING
- MULTIPLICATION
- Analog multiplexing and demultiplexing
- Timing applications
- Decade counter/decimal decode display (CD4017B）
- Clocks
