SN74HC590ANE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| JESD-609 Code | e4 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RCO OUTPUT; REGISTERED OUTPUTS |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 40MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 380 ns |
| Turn On Delay Time | 380 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC590ANE4 Overview
The device is packaged in the PDIPtype. The configuration of this device is based on 16terminations. The supply voltage of 5V permits it to operate with full flexibility. A wire connects the 1elements. All component pins are equal to 16. There are 16 pins going on to connect other parts in the circuit. To mount it, use the method of [0]. It is a member of the family [0]. In the device, the information consists of 8 bits. When it comes to this electronic device, RCO OUTPUT; REGISTERED OUTPUTS are much important features. The device has a temperature grade of INDUSTRIAL. It is packed with [0]. To operate, the device requires a voltage of [0]. The device operates at 85°Cfor extended periods with acceptable stability of electrical characteristics. This device is designed to operate within a specific temperature range, with the lower limit generally set at -40°C. The frequency of the system is 40MHz. There is a maximum voltage available for the device of 6V. It is possible to operate the device at as low a voltage as 2V.
SN74HC590ANE4 Features
Embedded in the PDIP package
RCO OUTPUT; REGISTERED OUTPUTS
Operating supply voltage of 5V
Frequency of 40MHz
SN74HC590ANE4 Applications
There are a lot of Texas Instruments SN74HC590ANE4 Counters & Dividers applications.
- Timing applications
- Decade counter/decimal decode display (CD4017B）
- Time delay circuits
- TRUE RMS-TO-DC CONVERSION
- Divide-by"N" counters/frequency synthesizers
- Up Counters
- SQUARE ROOT
- Divide-by-N counting
- SQUARING
- DIVISION
