SN74HC74DE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC74DE4 Overview
The flip flop is packaged in 14-SOIC (0.154, 3.90mm Width). Package Tubeembeds it. T flip flop uses Differentialas its output configuration. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. A 2V~6Vsupply voltage is required for it to operate. It is operating at a temperature of -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74HC series. A frequency of 60MHzshould not be exceeded by its output. There is a consumption of 4μAof quiescent energy. Currently, there are 14 terminations. The object belongs to the 74HC74 family. Power is supplied from a voltage of 5V volts. A 3pFfarad input capacitance is provided by this T flip flop. It is a member of the HC/UHfamily of D flip flop. There is an electronic part mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It reaches the maximum supply voltage (Vsup) at 6V. A normal operating voltage (Vsup) should remain above 2V. The superior flexibility of this circuit is achieved by using 2 circuits. High efficiency requires the supply voltage to be maintained at 5V. As a result of its output current of 5.2mA, it is very flexible in terms of design. It is reported that there are 4 input lines.
SN74HC74DE4 Features
Tube package
74HC series
14 pins
SN74HC74DE4 Applications
There are a lot of Texas Instruments SN74HC74DE4 Flip Flops applications.
- Count Modes
- Balanced Propagation Delays
- Guaranteed simultaneous switching noise level
- Counters
- Safety Clamp
- Individual Asynchronous Resets
- Functionally equivalent to the MC10/100EL29
- Consumer
- Common Clocks
- CMOS Process
